Stuff!

The list!  

Sinew - this is what we use to lash the frame together.

Blocks - these get attached to the frame, and the seat posts get attached to these.

Piping - this allows us to create a nice finished edge where skin rises above the gunwales.

Double sided tape - for temporarily holding the skin in place.

Webbing - this is used to add a ridge along the 

Cable ties - used to temporarily hold the frame together

Copper pipe - these hold the seat rests in place

Needles for stitching and lashing

Brass screws

Pegs for pegging the stringers and gunwales to the stem

Brass Nails to nail the gunwales to the ribs.  It's better than lashing because it doesn't create any raised surfaces

Concrete screws

The Japanese pull saw, used to trim the ribs, stringers, etc.

The wood!

Not shown, the precut and stained stems.